U.S. Army Criminal Investigation Command General Engineer in Stafford County, Virginia
Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.
About the Position: You will serve as the overall engineering advisor and consultant to the Deputy Chief of Staff for Support. Develops, manages and oversees strategic level planning, programming and budgeting of facility engineering and management programs for USACIDC headquarters and worldwide offices. Programs consist of, but are not limited to, the preventive maintenance, repair and construction of all facilities under control of USACIDC, as well as equipment maintenance.
Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.
- 30 Percent or More Disabled Veterans
- Current Department of Army Civilian Employees
- Current Permanent Department of Defense (DOD) Civilian Employee (non-Army)
- Executive Order (E.O.) 12721
- Interagency Career Transition Assistance Plan
- Military Spouses, under Executive Order (E.O.) 13473
- Non-Appropriated Fund Instrumentality (NAFI)
- Non-Department of Defense (DoD) Transfer
- People with Disabilities, Schedule A
- Priority Placement Program (PPP), Program S (Military Spouse) registrant
- Veterans Employment Opportunity Act (VEOA) of 1998
- Coordinate and review USACIDC facility and engineering programs.
- Develop standard methods and procedures to be used throughout the headquarters and field.
- Direct and oversee periodic visits to the field to provide on-site advice and review.
- Apply command priorities and recommends design and construction programs, within a constantly changing priority structure.
- Plan, program and determine allocating funds, resolving budget shortages and long-range staffing and contracting needs.
- Ensure the execution of viable and cost-effective agreements between USACIDC activities and their local public works support providers.
- Review work to avoid duplication and to assure consistency with agency policy.
- Occasional Travel
- Approximately 10% Business Travel May be Required
In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirements: Degree in Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) 1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Experience Required: To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job.
Specialized experience is defined as: work that involves developing, managing, and overseeing strategic level planning, programming and budgeting of facility engineering and management programs while serving in a public works position.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-13.
Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-13).
Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements or to substitute education for experience. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html
Foreign education must be evaluated for U.S. equivalency in order to be considered for this position. Please submit your foreign education evaluation with your application.
You will be evaluated on the basis of your level of competency in the following areas:
- Oral Communication
- Problem Solving
- Program Management
Other Requirements: Click herefor expanded definitions.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- Two year trial/probationary period may be required.
- Appointment is subject to the completion of a favorable suitability or fitness determination.
- Direct Deposit of Pay is Required.
What To Expect Next
If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility, qualifications, and quality ranking for this position. If you are determined to be ineligible or not qualified, your application will receive no further consideration.
The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "incomplete application" and you will not receive further consideration for this job.
Review our benefits
- If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- This is a Career Program (CP) 18 position
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/GetJob/ViewDetails/472139700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Salary Range: $112,021.00 to $145,629.00 / Per Year
Series & Grade: GS-0801-14/14
Promotion Potential: 14
Supervisory Status: No
Who May Apply: Federal Employees, Veterans, Individuals with Disabilities, Military Spouses and Former Overseas Employees
Control Number: 472139700
Job Announcement Number: NCAS170738238934